On this page are the Torelli handlebars, stems, saddles, seat posts, pedals, and sprockets.

Torelli Bormio Handlebars

Made from 7075 high strength aluminum alloy, double butted for lightness.

Anatomical design for comfort on both the drops and the tops.

31.8 (Oversize) bulge diameter. These bars are both stiff and light.

42 cm width weighs 255 grams

Widths: 34, 36, 38, 40, 42, 44 and 46 cm measured center to center. Add approximately 2 cm to the CTC method to get the end to end measurement.

Suggested retail: $59.95

Torelli Aspect Bars

Carbon wing bar Only 190 grams (42 cm size). Hidden underbar cable routing. Comfortable 'wing' platform on the tops. 8cm extension for easy reach to the brakes. 40, 42 and 44 center to center. 31.8 clamp diameter. Suggested retail $279.00

Torelli Bormio Stem

Bormio stem with 6 degree rise		Bormio stem with 17 degree rise
Bormio stem with 35 degree rise

The Torelli Bormio stem weighs approximately 155 grams in the 12 cm length. It is produced using the state of the art tri-dimensional (3D) forging process that yields a far stronger and lighter piece than previous fabrication systems such as extrusion and other older forging methods. Our stem graphics allow for reversing the stem for a greater rise.

Rise: 6 degrees, 17 degrees or 35 degrees

Lengths: 8, 9, 10, 11, 12, 13 cm measured along the center line of the stem. I note this because Italian stems are usually measured across the top of the stem and this can yield a 1/2 cm length difference. The 17 and 35 degree stems do not come in the 13 cm length.

Clamp diameter for bar: 31.8

Made for 1 1/8" steering tubes but an optional shim is available for 1" steering tubes.

The bar clamp bolts are a big 28mm apart to give a firm and rigid bar/stem assembly. An optional titanium bolt set can be ordered for the Bormio stem. Ti bolt kit suggested retail: $29.95

Stack height: 4 cm

Assembly torque specs

Handlebar clamp bolts: 5 nm

Steering tube clmap bolts: 4 nm

Bormio Stem suggested retail price: $59.95

Torelli Saddles

Bormio road saddles

• Modern long nose design for comfort over a wide range of positions
  
• Hollow Titianium rails are suspended from the base for shock absorption.
  
• Dual density foam gives both extra support and padding at contact points for extra comort.
  
• High tech microfiber cover with no sewing at the body-saddle contact points (except for the tricolor, we just couldn't resist!).
  
• Solid colors: black, white; and tricolor.
  

Weight: 240 grams. Suggested retail: $69.95

		Bormio saddle

Bormio XC saddle

A superb high performance MTB saddle that is extremely comfortable and completely suitable for road bikes as well.

• Hollow titanium rails.
  
• Superlight foam padding
  
• The rails are suspended from the base, giving extra shock absorption.
  
• Recessed center channel for perineal relief
  
• High tech microfiber cover
  

Black

Weight: 264 grams. Suggested retail: $69.95

		Bormio XC saddle

Amalfi Ti Gel saddle

• Hollow titanium rails
• Superlight foam with gel, and a hole for perineal relief
  
• High tech microfiber cover
  
• Rails are suspended from the base for shock absorption
  

Black

Weight: 249 grams. Suggested retail: $84.95

		Amalfi Ti Gel saddle

Amalfi SL saddle

• Hollow titanium rails
• Superlight foam padding
  
• Rails are suspended from the base for shock absorption
  
• High tech microfiber cover
  

Black

Weight: 200 grams. Suggested retail: $69.95

		Amalfi SL saddle

Torelli Aspect Carbon seat post

We've got 2 seat posts. Listed further below is our Bormio forged aluminum post. The Aspect Carbon post is 300 mm long and weighs only 160 grams. It is a monocoque carbon post with an internal rib for greater strength. If you are looking to lighten up your bike, I think you'll find most other posts either weigh more or cost more. 27.2 diameter, fitting most bikes. Suggested retail price: $159.00

Bormio Seat Post

Pedals

			Bormio road pedals Look® "ARC" compatible, includes a set of red cleats. Sealed bearings, 320 grams a pair. Cleat tension is adjustable. Cleats (below) are also available separately.
	Bormio XC pedals SPD®-compatible double entry. Includes a set of cleats. Cleats, below, are also available separately.

Marchisio Sprockets

One of our dealers did us all a great service and scanned just about the entire Marchisio instruction book on his site. Thanks Jim.

Competing brands and annual changes in specifications have left most bike riders holding expensive equipment, sometimes even complete bikes with almost no support from the major component manufacturers.

Marchisio sprockets from Torelli bridge the gap between the various manufacturers and their product changes.

Marchisio Sprockets, through the use of unique adapter rings, fit on Campagnolo 8, 9, and 10 speed systems as well as Shimano 8 and 9 speed systems (sadly, we cannot put 10 cogs on a Shimano freehub body).

More than that, because the cogsets are not predetermined at the factory, you may assemble any combination of our sprockets from 11 to 28 teeth, even putting a 9 speed cassette on a Campy 8 speed hub.

Complete sprocket set. Specify the cogs you want, and whether it is for Shimano or Campy. Suggested retails shown.

8 speed Shimano or Campy, $129.00
9 speed Shimano or Campy, $139.00
10 Speed Campy, $159.00